Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Tice
If your driveway gate is dragging, your keypad has gone dead, or a commercial entrance arm won’t lift, we can get it back in operation. We’re an electric gate specialist covering Tice and the surrounding east Fort Myers area, and we handle both electric and automated systems and manual gate hardware. That matters on Tice’s rural-edge lots, where a gate repair often starts with a leaning post in soft ground before anyone touches a motor. Our technicians have up to 10 years of experience, and we work on your brand rather than guessing at a generic fix. Call (855) 687-9638. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Tice Homeowners Call Cape Coral Gate Repair for Gate Repair
Tice is an unincorporated, historically agricultural pocket of east Fort Myers, and the gates here don’t look much like the HOA-grade ornamental entrances west of the river. Much of the housing is older single-family and modest ranch/slab homes on large, irregular lots, so our work is dominated by driveway, side-yard, and field gates hung on aging metal posts. That’s our daily bread, not a side job.
What sets us apart is brand-specific diagnostics. We know Ghost Controls residential openers and DoorKing entry systems, Mighty Mule driveway operators and Elite heavy-duty arms, so we aren’t puzzling out your controller from scratch. When a shared entry or a homeowner’s automated gate stops responding, that familiarity shortens the visit and gets you back in operation sooner.
We run residential and commercial work through the same team, which helps when a Tice property manager needs one company for a resident entry and a homeowner down the road needs a swing gate re-hung. If you want the full scope of what we do, our gate repair team handles motors, control boards, hinges, and access components. Call (855) 687-9638 for a free estimate and we’ll tell you straight what the job involves.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Commercial Gate Repair in Tice
Commercial Gate Repair in Tice usually means an entrance that serves more than one user: a shared drive into a small multi-family property, a barrier arm at a lot off a busy east Fort Myers road, or a resident-access gate at the end of a long easement. When one of those stops working, the whole property feels it. We handle the operator, the circuit board, the access-control hardware, and the safety edges, not just the mechanical swing.
That work is measured, ordered, and scheduled rather than rushed, because a commercial operator has to match the gate’s weight, the duty cycle, and the access system in place. A typical commercial repair in Tice runs $350 to $1,200, with larger operator or control-board replacements at the top of that range. The written estimate you get before any work starts sets the final price, and the estimate itself is free.
Shared Entry Systems and Access Control
A shared entry lives or dies by its resident access setup. We work on keypads, card readers, and the wiring that ties them to the operator, and we can diagnose why one code opens the gate while another fails. The goal is a system the management company can hand to residents without a callback the next week.
Barrier Arms and Heavy-Duty Operators
Commercial barrier arms and heavy-duty operators take a beating and need a technician who knows the brand. We service FAAC and Viking commercial arms along with DoorKing systems, tracing faults to the motor, the board, or the loop rather than swapping parts until something works.
Iron Gate Repair in Tice
Iron Gate Repair in Tice is mostly a story about rust and old posts. The subtropical Gulf climate here has a long humid season, and the galvanized and painted-steel posts common on these lots rust fast at the hinge and at the ground line. Wrought-iron panels on decades-old hardware bind instead of pivoting, and the gate stops latching cleanly long before it looks broken.
The job is often weld and rust repair, re-hanging, and realignment rather than replacement. A typical iron gate repair in Tice runs $200 to $650 depending on how much of the frame needs attention and whether the post has to be reset. We quote it in writing and agree the price with you before we start, so there’s no surprise on the invoice.
Welding and Rust Treatment
We treat rust at the source, then weld the frame back to square so the gate swings true. That’s more than a coat of paint over the problem, which is why it holds through the wet season.
Re-Hanging on Aging Posts
When the frame is sound but the gate still drags, the hinge post is usually the culprit. We reset the footing in properly compacted ground and re-hang the panel square rather than forcing the hinges to compensate.
Trusted Brands We Service in Tice
We’re independent and experienced with the brands Tice properties actually run. On the residential side that’s Ghost Controls and Mighty Mule driveway operators, common on the older homes and ranch lots here. On the commercial side it’s DoorKing and Elite, plus the heavy-duty operators that run shared entries. We don’t claim factory authorization, and we don’t stock parts on a truck, but we know these systems well enough to diagnose them fast and turn around a repair without a runaround. If your brand isn’t the first one we name, tell us what you’ve got. Chances are we’ve worked on it, and if we haven’t, we’ll say so before you commit. Call (855) 687-9638 for a free estimate.
Common Gate Repair Problems We See in Tice Homes
- Hinge posts leaning out of plumb. On large rural-edge lots the gate often sits at the end of a long unpaved drive with no hardscape, so soft, runoff-soaked ground lets the post lean and the swing gate drags. The fix is resetting the footing, not adjusting the hinges.
- Rust-seized hinges on old galvanized and painted steel. The long humid season works on decades-old hardware until it binds instead of pivoting. We free it, treat the rust, and re-hang so the gate swings freely again.
- Wooden gate panels swelling and sagging. Humidity swells the wood through the wet months, pulling the frame out of square on older slab-and-post setups. We correct the frame and realign the gate before it warps further.
- Driveway operators that stop responding. Automated systems on these lots range from a Mighty Mule to a small commercial operator, and faults can sit in the motor, the control board, or the keypad. Brand-specific diagnostics finds the real cause instead of guessing.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Repair in Tice, FL
Honest ranges help you plan, so here’s what gate repair in Tice typically runs. A basic hinge, latch, or hardware repair is $150 to $350. Post resets and realignment on soft ground run $250 to $700, since digging out and resetting a footing takes more work than adjusting a hinge. Electric and automated gate repair, including motor and control-board work, is $300 to $900 depending on the brand and the fault. Commercial operator and access-control repair sits at $350 to $1,200. The final price is set per job by the written estimate, and we agree it with you before any work starts, so there’s no surprise invoice afterward. The estimate itself is free. Call (855) 687-9638 for yours.
We Also Serve Cities Near Tice
We cover gate repair across the neighborhoods around Tice, including North Fort Myers, Buckingham, Fort Myers, and Cape Coral. If you’re just outside the Tice area, we can still help. Call (855) 687-9638 to confirm coverage for your address and get a free estimate.
Serving Tice, FL – Our Local Coverage Area
We serve Tice and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Tice
For a straight repair like re-hanging a swinging gate or fixing a hinge, you typically don’t need architectural approval. If you’re changing the style, height, finish, or color, or replacing a gate on a property governed by an HOA, check with the HOA or management company first. On Tice’s unincorporated lots many properties aren’t under HOA rules, but a shared entry often has its own standards. Call (855) 687-9638 for a free estimate and we’ll walk you through what your job needs.
The management company or HOA board that owns the entry handles approval, and we can work alongside them on the repair plan. For a shared entry with resident access, the operator, keypad, and safety edges all affect residents, so the decision usually goes through the property manager. We coordinate with them directly so there’s one clear point of contact. Call (855) 687-9638 to get a free estimate started.
The hinge post is almost certainly leaning in soft ground, which is common at the end of long unpaved drives in Tice. Adjusting the hinges only masks it; the post has to be dug out and reset in properly compacted ground so the gate swings square. If it’s still dragging, call (855) 687-9638 for a free estimate.
The most likely culprit is a blocked or misaligned safety photocell, followed by a control-board fault. Don’t stand in the gate’s path to test it, and don’t bypass the safety devices. This is automated machinery that can close on a person, so call us and let a trained technician diagnose it. Call (855) 687-9638 for a free estimate.
Most rusted iron gates on old posts can be repaired with weld and rust work and a post reset, at $200 to $650. Replacement is only needed when the frame itself is too far gone to weld back to square. We’ll tell you honestly which one your gate needs. Call (855) 687-9638 for a free estimate.
Get Your Gate Back in Operation
Whether it’s a dragging swing gate on a soft-ground post, a rusted iron frame, or a commercial operator that stopped responding, we can get you back in operation. Our technicians have up to 10 years of experience and we work on your brand. Call (855) 687-9638 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Cape Coral Gate Repair.